Changing Tension Codes Within A Section - Brother KE-430HX Service Manual

5. SETTING FUNCTION

5-1-6. Changing tension codes within a section

<Example: To change the tension of section 2>
1 Select the section to change the tension for.
2 Change the tension.
3 Confirm the change.
45
Final stitch
Carry out steps 1 to 3 in "5-1-2. Switching to pattern
editing mode" to switch to pattern editing mode.
You can press the section change key [
the section number side to move the work clamp/button
(1)
clamp automatically to the start of the section.
Move the work clamp/button clamp to the start of the
section you would like to change.
Press the tension change keys [
the desired tension (0 to 300).
(2)
Example: Change the tension code to "100" in section 2
To confirm the change, press the key
(3) If you press the needle movement change key [
[
will be canceled.
If you would like to end pattern editing without changing
any sections, press the back key
KE-430HX/KE-430HS, BE-438HX/BE-438HS
・ The change will be applied, and the tension for the
currently-selected section will change to the newly-set
tension value.
] before pressing the
or the home key
Final stitch
] or [ ] (1) on
] (2) to select
(3).
] or
key, the tension change
, the menu key
.