Brother KE-430HX Service Manual page 61

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer
Hide thumbs Also See for KE-430HX:
Table of Contents

Advertisement

Apply the changed parameter setting.
4
5
Repeat steps 2 to 4 above to set each memory switch.
Exit setting mode.
6
<List of memory switches (for operators)>
In the memory switch setting mode which can be checked from the adjustment menu (refer to "4-2. Memory switch setting
method (for technicians)"), the memory switches with the bottom two digits from 50 to 99 will also be displayed.
Setting
No.
value
Work clamp / button clamp lift timing after sewing is completed
OFF
Does not lift automatically.
001
1
Lifts at the final stitch position.
2
Lifts after moving to the home position.
Sewing speed at the sewing start
The sewing speed for the first 1 to 5 stitches is set by memory switch Nos. 151 to
155.
OFF
100
(Refer to "4-3. List of memory switches (for technicians)" for details on memory
switch Nos. 151 to 155.)
Slow start patterns can be selected from the slow start settings in the setting menu
ON
screen.
Single-stitch test feed
When the foot switch is depressed to the 2nd step (start switch), test feed moves
OFF
automatically to the final stitch, and when the foot switch is depressed to the 1st step
(work clamp switch), quick feeding is carried out.
200
The test feed moves 1 stitch at a time when the foot switch is depressed to the 1st
step (work clamp switch).
ON
In addition, test feed advances one stitch at a time when the machine pulley is
turned by hand.
Production counter display
300
OFF
The production counter is displayed when using cycle programs.
ON
The garment counter is displayed when using cycle programs.
X scale/Y scale unit (mm/%) (* The mm display may differ slightly from the actual sewing size.)
402
OFF
Displayed as %.
ON
Displayed as mm.
Switching program numbers by F keys
OFF
The program number switching function is disabled.
When the F1 to F4 keys are pressed, operation switches to the program number
which has been pre-assigned to the respective key.
406
ON
(8)
(7)
(4)
Assignment to F1 key: memory switch No. 407
Assignment to F2 key: memory switch No. 408
Assignment to F3 key: memory switch No. 409
Assignment to F4 key: memory switch No. 410
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Touch the OK key
・The setting value (4) will stop blinking and illuminate,
and this means that the parameter setting is confirmed.
・If you change the memory switch number or touch the
menu key
switch the screen without touching the OK key, you can
cancel the changes.
Touch the back key
・ The display will return to the setting menu screen.
Setting detail
5. SETTING FUNCTION
(7).
or the back key
or the menu key
Initial value
430H: OFF
438H: ON
(8) to
.
1
ON
OFF
OFF
OFF
50

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ke-430hsBe-438hsBe-438hx

Table of Contents