Memory Switch Setting Method (For Technicians) - Brother KE-430HX Service Manual

4. FUNCTION SETTINGS

4-2. Memory switch setting method (for technicians)

The settings for the memory switches are enabled for all programs.
Refer to "4-3. List of memory switches (for technicians)" for details on memory switch numbers and settings.
1 <Switching to memory switch setting mode (for technicians)>
2 <Memory switch settings>
(1)
If you would like to display only the numbers of
memory switches that have been changed from default
settings
(3)
3 Change the memory switch parameters.
When checking detailed explanations of memory switches
You can touch the check key
selected.
(7)
9
(2)
(1)
(1)
(3)
(6)
(4)
(5)
(7) to check the detailed explanation of the memory switch which is currently
KE-430HX/KE-430HS, BE-438HX/BE-438HS
1. While pressing the home key, turn on the power to
switch to the special menu screen.
2. At the special menu screen, select "Memory switch
setting" to switch to memory switch setting mode.
1. Press the [ ] or [
switch number (2).
2. When the [ ] or [
memory switches with current values that are different
from their initial values are displayed in order.
1. Press the [ ] or [
switch number (5). If the value that is displayed is
different from the value that is currently set, the value in
the display will flash.
2. If you would like to return the setting to the initial value,
press the RESET key
* The RESET key
setting value (the value being displayed) is different
from the initial value.
] key (1) to change the memory
] key (3) is pressed, the
] key (4) to change the memory
(6).
is only displayed when the