Thread Trimmer Mechanism (2) - Brother KE-430HX Service Manual

8-14. Thread trimmer mechanism (2)

Apply grease to the portions indicated by the white arrows.
For -5 specifications : 0.3mm
Except for -5 specifcations : 0.1mm
1. Fixed knife
2. Plain washers [2 pcs]
3. Screws [2 pcs]
4. Movable knife spacer
5. Movable knife assembly
6. Movable knife collar
7. Thrust collar
8. Movable knife shoulder screw
9. Bobbin thread clamp spring
*
10. Plain washers [2 pcs]
*
11. Spring washers [2 pcs]
*
12. Screws [2 pcs]
*
13. Needle plate
14. Flat screws [2 pcs]
15. Screws [2 pcs]
KE-430HX/KE-430HS, BE-438HX/BE-438HS
<Seen from the right>
<Seen from below>
For the KE-430HX/HS
specifications) and BE-438HX/HS, parts
marked with * are
accessories. Install them if necessary.
8. ASSEMBLY
4338B
(-05
supplied as
128