Table of Contents
To move the robot, install the battery (see below), power on, and use the brake release button or joystick
drive mode.
Lifting the Platform
CAUTION: You can damage the platform if you lift it incorrectly.
Use two people to lift the platform out of its crate.
Lift ONLY at the points shown.
Front Lifting Points
Lift on each side of the laser, under the upper side of the laser slot.
Do not lift at the center, where the laser is located. There is no frame support there.
Lift the metal frame behind the plastic body panels, not the plastic body panel.
Do not lift anywhere else! Refer to the following figure:
Page 27 of 134