Setting Baseline Expiration Time - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

Setting Baseline Expiration Time

Thermo Scientific
2. Highlight the length of time you want the instrument to wait before entering standby
mode and press Enter.
If you will be performing scans on your samples, you can set a time limit for which a collected
baseline will be valid. This is particularly useful when measurements are made in a production
setting across multiple shifts or when the nature of the blank sample changes dramatically
with time.
 To set the baseline expiration time
1. Highlight Baseline Expiration (hr:min) and press Enter.
2. Enter the desired time in the Entry baseline expiration time field and press Enter.
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
2
Setting Up the Instrument
Setting Utility Parameters
11