Table of Contents
Advertisement
18
Absorbance Difference
Recalling a Test
Recalling a Test
Using the Absorbance Ratio Screen
Setting Up Test Parameters
84
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
To recall a test
1. In the Absorbance Ratio screen (see
press Stored Tests.
2. Highlight the test to recall and press Enter.
Use this screen for:
•
Setting Up Test Parameters
•
Cell Correction
•
Saving a Test
• Viewing the list of stored tests
•
Measuring a Blank
•
Measuring Samples
To set up test parameters
1. In the Absorbance Ratio screen, highlight the parameter to set.
2. When the parameters are set, press Save Test to save the test or Run Test to measure a
blank or samples.
Note If Cell Correction is ON, you must run the Setup Correction application before
you can access Run Test or Measure Samples.
Note If Auto Save Data is ON, you must enter a Data File Name before you can
access Run Test or Measure Samples.
"Using the Absorbance Ratio Screen"
on
page
84),
Thermo Scientific
Hide quick links:
Advertisement
Table of Contents
