Setting Up The Instrument - Thermo Scientific Nicolet iS5 LS User Manual

2
Operating the Instrument

Setting Up the Instrument

Electrical and Communication Cabling
6 Nicolet iS5 LS User Guide
NOTICE Keep the instrument sealed and desiccated at all times and check the
indicator regularly. Equipment damage due to failure to maintain seal and desiccation is
not covered by the warranty. If you have questions about this requirement,
For optimum instrument stability, the sampling arm should remain closed except when
cleaning it or loading a sample. Keeping the arm closed also allows background measurements
to occur automatically.
This section covers these topics:
• Electrical and Communication Cabling
• Turning the Power On and Off
The illustration below shows the correct cable connections for electrical power and data
communication.
Figure 3. Electrical and communication cabling for the Nicolet iS5 LS analyzer
Check the Site and Safety Information guide in your electronic documentation set for electrical
and other system requirements before you connect the power cord. The wall outlet must be
equipped with a 3-wire line: live, neutral, and ground.
humidity
contact us.
Power
Communication
Communication
(USB) cable
Power cable
Thermo Scientific