Water Analysis Application; Loading A Test Method From The Usb Stick To The Aquamate - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

Water Analysis Application

Loading a Test Method from the USB Stick to the AquaMate

Thermo Scientific
The Water Analysis Application supports commercial water analysis kits and methods where
the manufacturer specifies a factor or equation that yields the concentration of the analyte as a
result. Thermo Scientific Orion AquaMate spectrophotometers come with a set of
pre-programmed methods loaded onto a USB memory device. Up to ~90 methods can be
loaded into the AquaMate's internal library and accessed at any time. For more information,
see "Managing Stored Tests"
Smart Start menu. For more information see
1. Access the USB memory stick using a computer.
2. Copy the desired test method(s) from the Orion, Merck and/or CHEMetrics folders to
the Thermo folder.
3. Remove the USB memory stick from the computer and insert it into the USB port on the
front of the AquaMate spectrophotometer.
4. When the AquaMate spectrophotometer is first powered on, it will display the initial
measurement screen.
5. Press test to access the test types.
6. Press the keys to highlight Water Analysis and press enter.
7. Press the Stored Tests function key.
8. Press the keys to highlight Load test from USB drive and press enter.
9. Press the keys to highlight the test method to be loaded and press the Load Test
function key.
10. Press the Save Test function key.
11. Press the keys to highlight Save as an internal test and press enter.
12. Press the Accept Name function key.
13. Press the keys to highlight Include as a SmartStart test or Do not include as a
SmartStart test and press enter.
on page 25. The methods can also be made available from the
"SmartStart"
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
on page 31.
10
37