Table of Contents
Advertisement
Hardware Description: Basic System
The AutoXP
Basic System
Jumper Setting
Lithium Backup
2-4 AutoXP Users Guide
A set of the illustrations are provided in this chapter.
The jumper setting for the main board discussed in this section is provided
in Appendix C.
A Lithium backup coin cell battery is installed on the main board (BH1)
to maintain configuration and memory when power is removed from the
Battery
unit. The in-circuit connection of the Lithium battery is set by switching
the S1 direction toward the front edge of the main board.
Tip Loss of configuration or historical data with the backup battery
installed may indicate that the Lithium battery needs to be replaced or S1
switch is on off position.
Tip The Lithium battery is a field replaceable item.
Warning The Lithium battery may explode if mistreated. Do not attempt to
recharge, disassemble, or burn it.
Thermo Fisher Scientific
Advertisement
Table of Contents
