Table of Contents
Advertisement
Running a Water Test
Thermo Scientific
When a method has been loaded, the following screen will appear.
Press the Run Test function key. The following screen appears.
Open the sample compartment. If the desired sample holder is not in the beam, press the
button on the carousel control of the keypad corresponding to the correct cell holder shape
(circle for vials or test-tubes, square for 10 mm square cuvettes, rectangle for long path
rectangular cuvettes). If necessary, the instrument will rotate the carousel to place the correct
cell holder in the measurement position.
Insert a cuvette, tube or vial containing the blank or zero solution into the sample holder.
Note Ideally, the same cuvette or vial, or one that has been matched to the sample vial,
should be used.
See
Using a Reverse Color Method
for use of reagent blanks in reverse color methods.
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
10
Water Analysis Application
Running a Water Test
39
Hide quick links:
Advertisement
Table of Contents
