Replacing The Tungsten Lamp - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

Replacing the Tungsten Lamp

Thermo Scientific
5. Use a flat-blade screwdriver to remove the fuse holder.
6. Unsnap both fuses to remove them.
7. Insert the new fuses, pushing them in so they snap into place.
8. Replace the fuse cover.
9. Replace the power cord.
10. Plug the instrument back in to the wall outlet or power strip and turn on the power.
Note If the fuse blows again, contact your distributor or technical support.
WARNING This lamp gets very hot during operation. Before removing the lamp, turn off
the instrument and allow the lamp to cool for 10 minutes.
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
23
Maintenance
Replacing the Tungsten Lamp
123