Chapter 24 Parameters - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

Parameters
Thermo Scientific
Parameter
+ - x 
% of lamp life used
3-Pt Net
Absorbance
Accept Name
Add Character
Add nm
Area
AutoPrint
Autoscale
Baseline Expiration
Beeper
Calculation Baseline
Description
Enters math operators when in Calculator mode
(Utility)
Displays the estimated percentage of lamp life used (based on a
typical lamp life of five years)
(Utility)
Lets you calculate peak height from the tangential baseline in
the graph
(Scanning)
Enters the absorbance value
Accepts the displayed Name entry
(Test Name and Edit [Units])
Adds a highlighted character to the Name entry
(Test Name and Edit [Units])
Lets you add a wavelength and factor to the list in
Multiwavelength tests and some Performance Verification tests
Lets you calculate area under the peak in the graph
(Scanning)
Turns the automatic printout on or off
Rescales the graph to the original ranges of the X- and Y-axes
(Kinetics, Scanning)
Enters the time when the baseline for scan tests will need to be
collected again
(Utility)
Turns the audible signal for key presses on and off
(Utility)
Selects the zero baseline or the tangential baseline to calculate
area under the peak in the graph
(Scanning)
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
24
127