Cell Holder Initialization - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

3
Accessories
Cell Holders and Cell Holder Accessories
Cell Changer System

Cell Holder Initialization

14 Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
Standard Cell Holders
When you press Run Test to start a measurement, the instrument displays the message
"Calibrating and Checking Turret, Please Wait" while it attempts to initialize the cell changer
at the Blank position. With the Water Analysis carousel, the spectrophotometer will rotate the
carousel to the default position, then rotate the selected cell holder back into the measurement
position. This ensures that the cell holder is properly positioned in the beam.
If a single cell holder has been installed, the message "Error, Single Cell Holder found. Use
Single Cell Holder?" appears. Press Accept Change to continue, or install the cell changer and
press Cancel Change.
Single Cell System
Thermo Scientific