Recalling And Recalculating Graphical Kinetics Results - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

21
Kinetics

Recalling and Recalculating Graphical Kinetics Results

Recalling and Recalculating Graphical Kinetics Results
102 Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
3. Press Measure Sample.
After the measurement, the kinetics data and rate appear.
4. If a Single Cell Holder is installed, press Measure Blank to measure the blank, insert your
sample and then press Measure Sample.
After the measurement, the kinetics data and rate appear.
To switch between tabular and graphical displays, press Graph/Tabular.
On a graphical display you can press Edit Graph and then press Cursor to move the
cursor line from one position to another on the plot. As the cursor moves, the rate and
result values indicate the values for the point where the cursor is located.
The Kinetics application lets you view and manipulate results in graphical or tabular form.
When your results are displayed, you can modify the range (start and stop time) and the
instrument recalculates the reaction rate.
When working with graphical kinetics results, you need to press Edit Graph before you can
rescale and recalculate.
Thermo Scientific