14
Concentration Measurements—Advanced A-%T-C
Recalling a Test
Recalling a Test
Setting Up Test Parameters
Measuring a Standard
62
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
To recall a test
1. Press Stored Tests.
2. Highlight the test and press Enter or Load Test to display the parameters for the selected
test.
To set up test parameters
1. Highlight the desired parameter.
Some parameters appear only if you select a concentration mode, while others appear
regardless of the selected measurement mode.
See
Parameters
for a complete list.
2. When the parameters are set, press Save Test to save the test or Run Standard to measure
a standard (if in Conc/Std), or press Run Test (if in Conc/Factor).
To measure a standard automatically (using Auto 6 or Auto 3)
1. With Measurement Mode set to Conc/Std, press Run Standard.
2. Enter the concentration of the standard and press Enter.
3. Press Measure Blank.
Thermo Scientific