Running A Test Method From The Usb Stick; Running A Test Method From The Aquamate Instrument Library; Running A Test Method From The Aquamate Smartstart Menu - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

10
Water Analysis Application

Running a Test Method from the USB Stick

Running a Test Method from the USB Stick

Running a Test Method from the AquaMate Instrument Library

Running a Test Method from the AquaMate SmartStart Menu

38 Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
13. Press the Run Test function key to begin using the test method.
Refer to the specific reagent chemistry section for detailed instructions.
1. Make sure the test method to be run is in the Thermo folder on the USB stick and the
USB stick is connected to the USB port on the front of the AquaMate
spectrophotometer.
2. From the initial measurement screen, press test to access the test types.
3. Press the keys to highlight Water Analysis and press enter.
4. Press the Stored Tests function key.
5. Press the keys to highlight Load test from USB drive and press enter.
6. Press the keys to highlight the appropriate test method and press the Load Test
function key.
7. Press the Run Test function key.
1. From the initial measurement screen, press test to access the test types.
2. Press the keys to highlight Water Analysis and press enter.
3. Press the Stored Tests function key.
4. Press the keys to highlight Load internal test and press enter.
5. Press the keys to highlight the appropriate test method and press the Load Test
function key.
6. Press the Run Test function key.
1. From the initial measurement screen, press test to access the test types.
2. Press the SmartStart function key.
3. Press the keys to highlight the appropriate test method and press the Load Test
function key.
4. Press the Run Test function key.
Thermo Scientific