Concentration Measurements—Standard Curve
Application
Thermo Scientific
The Standard Curve application lets you perform a quantitative analysis experiment using a
multipoint calibration curve. A calibration curve is composed of standards of well-known
concentration. A fit of this standard curve is used to measure the concentration of samples.
Use Standard Curve for:
• Creating a standard curve (set up the parameters and then measure the standards for the
curve)
•
Cell Correction
•
Measuring Samples
• Viewing calibration curve data: select between graphical and tabular displays
•
Editing a Standard
Curve: change the number of standards, select a different curve fit or
delete points from the curve.
• Viewing and saving sample data measured using the standard curve
To get started, press Test, highlight Standard Curve and press Enter.
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
20
91