6-Position Cell Holder
Single Cell Holder
Selecting and Positioning Cuvettes
Thermo Scientific
Note If the Cell Positioner method option is set to Auto 6, whenever you press Run Test
to start a measurement, the instrument attempts to initialize the cell positioner. If a single
cell holder is installed, the message "Error, Single Cell Holder found. Use Single Cell
Holder?" appears. Press Accept Change to continue the measurement with a single cell, or
install the 6-cell changer and press Cancel Change.
See the parts list for a more detailed list of available accessories.
The compatible wavelength range for different types of cells depends on the material used.
Cell Type
Optical Glass
Borosilicate Glass
Disposable:
Quartz
Polystyrene
Methacrylate
Acrylic
UV-transparent
Note See the manufacturer's specifications and work within the recommended range.
Wavelength
360 nm to > 1100 nm
330 nm to > 1100 nm
190 nm to > 1100 nm
> 340 nm
> 300 nm
> 280 nm
> 220 nm
1
Spectrophotometer Basics
Selecting and Positioning Cuvettes
269-289800
5