Scanning A Sample - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

Scanning a Sample

Thermo Scientific
2. Place the blank in the B position.
3. Press Collect Baseline.
While the spectrophotometer is measuring the baseline, a status message appears
indicating the progress of the baseline scan. After the baseline is measured, this message
disappears.
Note To switch between tabular and graphical displays, press Graph/Tabular.
Note If a 6-Position Cell Holder is installed, be sure to place the sample in cell
position #1. The instrument always uses cell position #1 to scan the sample.
 To scan a sample
1. Press Run Test.
If a 6-Position Cell Holder is installed, place the sample in cell position #1.
2. Press Measure Sample.
Note To switch between tabular and graphical displays, press Graph/Tabular.
Note If Auto Save Data is ON, you must enter a Data File Name before you can
access Run Test or Measure Samples.
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
15
Scanning
Scanning a Sample
67