Programming A New Method Or Altering The Factor(S) In A Method - Thermo Scientific Orion AquaMate 8000 UV-Vis User Manual

Programming a New Method or Altering the Factor(s) in a Method

Thermo Scientific
Press the Test button to go to the main menu. Use the up/down arrow keys to select Water
Analysis if necessary, then press the Enter button to get to the Water Analysis test menu,
below:
Press the Enter button to alter the value for the highlighted parameter. Change the
highlighted parameter by pressing the up/down buttons. The measurement wavelength can
also be edited by simply starting to press number keys when the parameter is highlighted. If a
reverse color test is being programmed, then the Reverse Color option must be enabled by
setting this field to On.
Note The Manual 3 is the only available Sample Positioner option in the Water Analysis
test.
Select More Parameters to enter the second screen of the Water Analysis test programming,
below:
Programming a New Method or Altering the Factor(s) in a Method
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
10
Water Analysis Application
41