Create Report Definitions; Load Exist Report Definition - Toshiba Stratagy IVP8 Installation And Maintenance Manual

System Reports
Report Definitions

Create Report Definitions

1. From the Main Menu, press Alt+R.
2. Type the password and press Enter. (The default password is Stratagy, with the first letter
uppercase.) The Reports screen displays (see
3. Number the Report Definition Fields in the column order you want them to appear on the
report.
For example, if you want a report listing the User ID, Calls Last, and Messages Maximum from
left to right, the values for these fields would be:
User ID
Messages Maximum
Calls Last
4. Select Save by pressing Alt+S.
Note
5. Enter the name and press Enter.
Report names may be up to eight
alphanumeric characters long (A~Z,
0~9) and are not case sensitive, e.g.,
report names LISTING, Listing, and
listing all reference the same file. The
Reports Menu displays.
6. When you have finished with the Reports Menu, press Esc. The Main Menu displays.

Load Exist Report Definition

1. From the Reports screen, press Alt+L.
2. Type the name of the report definition
...or press F2 to display a list of saved
report definitions. Highlight the report
name and press Enter.
3. Press Enter again. The Reports Menu
displays the report definition selection.
10-4
: 1
: 3
: 2
Only report definitions which you plan on using again should be saved.
Figure 10-2).
4216
4070
Stratagy I&M 06/02