Fixed Length User Ids - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Configure Stratagy
System Parameters
Parameter
n_rings

Fixed Length User IDs

The fixed length of a User ID is based on its first digit.
fixed_len0
fixed_len1
fixed_len2
4-30
Number of rings to wait before answering per port. This is useful for those
telephone systems that do not allow incoming lines to ring in a station hunt group or
do not provide delayed ringing. Also, it may be used to set up backup answering for
a secondary attendant operation.
Note There is a side effect. When a user wants to pickup his messages, he must
wait the specified number of rings before Stratagy answers.
Example: To have port 1 answer on the second ring, use set n_rings 2 1.
Possible values: 1~9 (number of rings); valid port number
Default: 1 1
1 2
.
.
.
1 8
Maximum digits Stratagy expects when a caller dials a User ID beginning with zero.
There is only one User ID mailbox that can have zero as its first digit, and that is
User ID 0. If the value of this parameter is changed to 1, and a caller dials 0 in a
place where a User ID mailbox number is expected, then Stratagy immediately
accepts the 0 as the User ID mailbox number and goes to the next processing step.
If the parameter's value is left at 8, then a timeout or pound sign (#) is required to
terminate the User ID. This latter procedure is compatible with earlier versions of
Stratagy.
Possible values: 1~8
Default: 8
Maximum digits Stratagy expects when a caller dials a User ID beginning with one.
When changing this value, make certain that it is still possible to log in and send
messages to all existing User ID mailboxes that begin with this digit. For example, if
there are five-digit User ID mailboxes that begin with this digit, then you should not
set the value of this parameter less than five. Check all User ID mailboxes,
including users, guests, and reserved (411, 990, etc.)
Possible values: 1~8
Default: 8
Maximum digits Stratagy expects when a caller dials a User ID beginning with two.
When changing this value, make certain that it is still possible to log in and send
messages to all existing User ID mailboxes that begin with this digit. For example, if
there are five digit User ID mailboxes that begin with this digit, then you should not
set the value of this parameter less than five. Check all User ID mailboxes,
including users, guests, and reserved (411, 990, etc.)
Default: 1~8
Default: 8
Description
Stratagy I&M 06/02