Toshiba Stratagy IVP8 Installation And Maintenance Manual page 210

AMIS Networking
Configuring Stratagy for AMIS
7. Access the User ID mailbox via telephone and record Greeting 1: <explains that this is a
network mailbox>.
➤
To create and program a Proxy mailbox
1. From the Users Menu, define the following Users Menu fields (see
User ID
Comment
Do Not Disturb ON
Store Messages YES
Gateway Box
AmisSysNumberTelephone number remote node uses as identification. The format (including #
Example
2. From the Notify Menu, highlight the first available <Disabled> description line and press the
spacebar to toggle the Notify Record Options Enabled field to YES. (See
page 6-27
3. Press ALT+T to select Templates.
4. Highlight the AMIS PROXY template and press Enter.
5. Define the following Notify Menu fields:
MTWTFSS
From
To
Notify After
Continue Every Number of minutes between each retry attempt to contact the remote node.
Max Times
Title
Type
Method
Example
Variable
6. Press Alt+S to save the record.
7. Have the owner of the mailbox record a personal greeting for the Proxy mailbox.
9-6
Any valid User ID or the same number as the remote mailbox, providing there are no
conflicts with existing User ID mailboxes on the local system.
PROXY MAILBOX and any other identifying information.
YES
signs)1#area code#telephone number#.
1#714#5551212#.
.)
Toggle between Y and N for days AMIS should attempt to call the remote node.
Time for Stratagy to start attempting AMIS call outs.
Time for Stratagy to stop attempting AMIS call outs.
Number of minutes after the message has been sent to the Gateway mailbox should
Stratagy attempt to contact the remote node. If this is the only record in the Notify
Menu, uses the default value 0. If other records appear in this Notify Menu, set
Notify After to a different number of minutes for each record to avoid conflicts.
Number of times Stratagy should attempt to contact the remote node.
AMIS PROXY. Comment or reminder that identifies the call out definition or
destination.
NORMAL (standard) or URGENT (optional), as appropriate.
Program the KN( ) token inserting the line access code, the %V variable, and the
number of the User ID mailbox on the remote node. If the number is the same as the
Proxy mailbox on the local Stratagy, then use %U (replaces with current User ID
number).
KN("9,%V,%U").
Value Stratagy inserts in place of %V in the Method field. Type the telephone
number of the remote node.
Chapter 6 – Menus).
"Notify Menu" on
Stratagy I&M 06/02