Toshiba Stratagy IVP8 Installation And Maintenance Manual page 80

Configure Stratagy
System Parameters
Parameter
box_snd
cancel_busy_hold
clock_sync
cmt_maxlen
connect_tone
4-16
Sets the Direct Message User ID for all ports or for specified ports. The Direct
Message ID enables Stratagy to record a message for a User ID without having to
execute the Extension field and/or hear the User ID's greeting. This is particularly
useful for an Operator transferring directly to voice mail.
Example: Define this parameter as box_snd 998 1 to set User ID 998 as the Direct
Message User ID for port 1. If no port is defined, then 998 is enabled for
all ports.
Possible values: valid User ID and valid port
Default: 998 – enabled for all ports.
Enables callers to hold for busy extensions.
True: Callers cannot hold for busy extensions.
Calls proceed as if a Ring No Answer.
False: Callers can hold for busy extensions.
Possible values: true, false
Default: false
Re-synchronizes the DOS software clock with the PC hardware clock. It may be
useful to turn this off (by setting it to False) if you have another utility controlling the
PC clock.
True: Stratagy re-synchronizes the DOS software clock with the PC hardware
clock.
False: Stratagy does not re-synchronize the clocks.
Possible values: true, false
Default: true
Number of seconds for recording a list comment for the User parameter of Manage
Your Lists.
Possible values: 1~99 (seconds)
Default: 10
A beep plays when completing a transfer.
True: Stratagy plays a beep when completing a transfer.
False: Stratagy does not play a beep when completing a transfer.
Possible values: true, false
Default: true
Description
Stratagy I&M 06/02