Restore Utility - Toshiba Stratagy IVP8 Installation And Maintenance Manual

8. When the backup is complete, press Y to reboot Stratagy. The Stratagy Admin PC returns to the
C:\ DOS prompt.
Note You cannot reconnect to IVP8 using Stratagy Admin until the IVP8 status light is green.
Any attempt prior to that time fails.

Restore Utility

CAUTION! Because of possible errors that can be induced through the telephone network,
Toshiba advises that you perform the Restore Utility on site.
The Stratagy Restore Utility is used to restore previously backed up names, greetings and/or
database from the Stratagy Admin PC to the Stratagy.
Restore the Database(s)/Names/Greetings
Stratagy Voice Processing is suspended during the restore procedure. Any
CAUTION!
existing connection is broken. For additional information on the Restore
procedure, see the Caution on
1. From the Tools menu, press
2.
2. From the Restore screen
(shown at right), enter the
selection number. A second
screen displays requesting
the source directory.
3. The directory defaults to C:\VSA3\BACKUP on the Stratagy Admin PC for Flash and
C:\VSA3\BACKUP for the IVP8. If you have the file(s) backed up to a different directory,
type over the default. Press Enter.
Notes
•
Restoring files from the Stratagy Admin PC's floppy disk drive is not supported.
•
Be sure to enter the complete path, including the drive letter.
4. (Optional) If you entered selection 2 "Restore Names & Greetings" in
enter a beginning and ending mailbox number. Press Enter after each entry
Note Leaving both fields blank defines all mailboxes.
...or if you entered selection 3 "Restore Database, Names & Greetings" in
in the mailbox number fields to leave them blank.
This selection restores the entire database and all names and greetings. You cannot
Important!
restore selective mailboxes.
Before the restore starts, Stratagy Admin
calculates the time the process takes and
displays a status message (sample shown
at right).
5. Press Y to restore the files
...or N to cancel the procedure.
You are asked if you want to shut down active voice channels.
Stratagy I&M 06/02
Maintenance, Upgrades and Troubleshooting
page 11-3.
Tools
3240
Step 2, you are asked to
Step 2, press Enter
11-5