Toshiba Stratagy IVP8 Installation And Maintenance Manual page 87

Parameter
nam_maxlen
n_msg_scan
n_ochan
notify_restriction
partial_q_ok
password
pbx_type
Stratagy I&M 06/02
Maximum number of seconds for recording a User ID's name and extension. The
name and extension recording is used for directory access and whenever Stratagy
tries to identify the User ID.
Possible values: 1~99 (seconds)
Default: 5
Threshold for message count. When a user logs onto their mailbox, if the total
number of messages (i.e., new, saved, pending, urgent) is less than the number
defined in this parameter, Stratagy scans the number of messages and reconciles
the message count if an error is encountered.
Possible values: 0~99
Default: 0 (no message scan at log in time)
Number of dedicated ports (starting with the highest port) to reserve for outbound
notify ports. This number must not exceed the total number of available ports. When
set, the defined port does not accept incoming calls.
Important!
If the value is set to 0, Stratagy attempts to use the highest numbered
IDLE port. The danger of this is that Stratagy may inadvertently begin
a notification on a port with an incoming call.
Possible values: 0~24 (number of ports)
Default: 0
Restricts Notify to only the defined port. The port still takes incoming calls. This is
particularly useful for those switches that require message lights to be turned off by
the same port that turned them on.
Possible values: 1, 2, ..., highest port number
Default: 1 (To enable, remove the starting # and set the value.)
Enables the Q( ) token to save the message even though all prompts are not
completed.
True: Q( ) token saves the messages.
False: Messages are not saved if prompts are not completed.
Possible values: true, false
Default: false (To enable, remove the starting # and set the value.)
Sets the system password. The password is case sensitive; i.e., uppercase letters
are different from lowercase letters.
Possible values: up to eight alphabetical characters. The single quotes are
required.
Default: 'Stratagy'
Defines the model of Strata CTX/Strata DK that is used as the host system.
Possible values: DK8, DK16, DK16E, DK24, DK56, DK96, DK14/40, DK14/40S
(DK24/40 with SMDI), DK280, DK280S (DK280 with SMDI), DK424i, DK424,
DK424S (DK424 with SMDI)
Default: DK424i/DK424
Description
Configure Stratagy
System Parameters
4-23