System Identification Number; Configuring Stratagy For Amis - Toshiba Stratagy IVP8 Installation And Maintenance Manual

System Identification Number

The System Identification Number consists of a country code (the digit "1" in North America), area
code, and seven-digit phone number. This number not only identifies the calling system, but can
also be used by the administrator to configure the local system to enable message replies.

Configuring Stratagy for AMIS

There are three steps to configuring Stratagy to act as an AMIS node:
1. Set the Stratagy AMIS system parameters.
2. Create Gateway mailboxes for each remote system with which Stratagy communicates.
3. Create Proxy mailboxes for each remote user that wishes to have a local mailbox.
Step 1: Set AMIS Parameters
For AMIS to operate correctly, you must activate the AMIS configuration parameters in the
Stratagy system and modify their settings.
settings.
1. From the Stratagy Configuration Utility screen, press 2
...or use the arrow keys (↑↓) to highlight Stratagy System Configuration and press Enter.
The Stratagy System
Configuration Screen is split into
two areas: the left screen area lists
the actual parameters and their
values, the right screen area lists
context-sensitive help for each
parameter. See
of the parameters, their
definitions and default settings.
2. Using the arrow (↑↓) or Page
Up and Page Down keys scroll
to the AMIS configuration
parameter section.
3. Modify the parameter using the line editor at the top of the screen. For each parameter listed in
Table 9-1, remove the starting #. Then set appropriately.
4. Press Enter to save your changes
...or Esc to exit without saving changes.
5. Press Esc. The Stratagy Configuration Utility screen displays.
We recommend that you back up the current database at this time by selecting the Stratagy
Note
Backup Utility. See
6. Press Esc again. Stratagy reboots and returns to the Main Menu for call processing or Stratagy
programming.
Stratagy I&M 06/02
Table 9-1
Table 9-1 for a list
"Backup Utility" on page 11-3
System Identification Number
lists the required parameters and their correct
.
AMIS Networking
4073
9-3