System Parameters - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Configure Stratagy

System Parameters

System Parameters
Most Stratagy System Configuration options do not require modification. We recommend that you
modify the system password immediately. All other options have default values, but can be
modified as required.
Parameter
accept_0_calling_id
active_hold
adpcm_hq
adpcm_nq
adpcm_pq
advertising
4-14
Specifies whether Stratagy should accept 0 as valid mailbox number. If the
parameter is set to "false," SMDI packets that include 0 for the "forwarding from
station number" (forwarded call SMDI packets) or for the "calling station number"
(direct call SMDI packet) are not accepted.
Possible values: false (mailbox 0 not accepted), true (mailbox 0 accepted)
Default: false
Controls what a caller must do to hold for a busy extension.
True: Caller must continue pressing
another extension, or leave a message at the tone.
False: Caller selects once to hold for a busy extension and the system enables
the caller to hold until he/she is either transferred, selects another
extension, or presses
Possible values: true, false
Default: true
Sets the sampling rate for outgoing greetings. The higher the sampling rate, the
better the sound quality; however, the amount of disk space used is also higher.
CAUTION! If you change this parameter on an active system, all previously
recorded greetings are lost.
Possible values: 24, 32, 64
Recommended value: 64 (Flash: 24)
Default: 64
Sets the sampling rate for incoming messages. The higher the sampling rate, the
better the sound quality; however, the amount of disk space used is also higher.
CAUTION! If you change this parameter on an active system, all previously
recorded messages are lost.
Possible values: 24, 32, 64
Recommended value: Flash: 24, IVP8: 64
Default: 32
Sets the sampling rate for the system prompt file. This is predetermined by the
sampling rate at which the system prompt file was recorded.
CAUTION! Do not change this value unless you have installed the
appropriate system prompt file.
Possible values: 8, 24, 32, 64
Recommended value: 64 (Flash: 24)
Default: 64
Advertising string that displays when the Main Menu screen blanks after a specified
number of minutes of inactivity (per tmo_blank).
Possible values: 58-character string. The single quotes are required.
Default: No default
Description
to hold for a busy extension, enter
again to leave a message.
Stratagy I&M 06/02