Retrieve Trace File - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Retrieve Trace File

This function copies the trace data log file (TRACE.OUT) to the Stratagy Admin PC's hard drive.
As part of this function, a new Trace Filter Setup screen (see
you to specify the filtering rules for selecting the desired trace records.
After Stratagy Admin filters the trace data, it decodes and expands the data into records containing
the information requested by you in the Trace Filter Setup screen.
The size of the trace file can be set using the trace_cap parameter in the install.cfg file of
Note
Stratagy (see
1. From the Tools menu, press 7.
2. The trace file name defaults to
TRACE.OUT. From the Retrieve
Trace File screen (shown at right),
press Enter.
3. Enter the directory where you want
to copy the file. The default is:
C:\xxxx.
If you need a different directory, type over the default. Press Enter. Be sure to enter the
complete path. If the directory already exists, you are given the option of entering a new
directory or overwriting the file. The Trace Filter Setup screen displays (see
page 11-8).
4. Select the items you want included in the TRACE.OUT file. Refer to the field descriptions on
page 11-8.
5. When you are finished, press Alt+e.
Once the data has been
expanded, Stratagy copies
the file to the directory/file
specified in Step 3
procedure. A dialog status
box displays (shown at
right).
When the copy is complete,
another status box displays
(shown at right):
You can use any text editor
to review the file.
Stratagy I&M 06/02
"trace_cap" on page 4-27 for a description of the parameter)
of this
Maintenance, Upgrades and Troubleshooting
Figure 11-1 on page 11-8) enables
Figure 11-1
Tools
on
3253
3254
11-7