Toshiba Stratagy IVP8 Installation And Maintenance Manual page 8

7HOHSKRQH 6\VWHP &RQILJXUDWLRQ
4
The Flash Voice Processing system works with all Strata® DK280/DK424/DK424i,
DK40i/DK40/DK16e/DK16, DK14/DK8 and DK24/DK56/DK96 (Release 4) systems.
❐
Make sure there are enough single line (analog) station ports on the Strata DK to support the number of
Flash ports required.
❐
Strata DK needs to recognize the Flash's DTMF signaling. Make sure an RRCS is installed on the
DK424i/DK424/DK280 RCTU, a K5RCU, K5RCU2 or K4RCU3 in the DK40i/DK40/DK16e/DK16,
or CRCU in the DK24/DK56/DK96.
❐
Run Program 03 and assign these code(s) where the DTMF receiver is installed:
DK424i/DK424/DK280
Code 92, 93, or 94 for slot 00
Note When DK14/DK8 is powered on, Program 03 automatically assigns the correct code for the
QRCU.
60', &RQVLGHUDWLRQV
5
We recommend Simplified Message Desk Interface (SMDI) integration for optimum
performance of both the Stratagy and Strata systems.
❐
The Strata DK telephone system must be equipped with a PIOU/PIOUS, RSSU, or RSIU/RSIS card for
SMDI integration.
❐
Strata DK280/DK424/DK424i
Release 3.1 software or higher.
❐
Set code 43 in Program 03 for PIOU/PIOUS/RSSU or code 49 for RSIU/RSIS.
❐
A serial cable must be installed between the PIOU/PIOUS/RSSU/RSIU card and the Flash. Toshiba's
PPTC-9 (with six-conductor line cord) is recommended.
❐
Refer to the Stratagy I&M Manual for complete instructions on configuring Stratagy Voice Processing
systems for SMDI integration.
-XVW D )HZ 0RUH 7KLQJV
6
❐
Be sure to change the security code of the Shutdown Mailbox User ID 983. See the Stratagy
Installation & Maintenance Manual for details.
❐
When using an internal modem in the Stratagy Admin PC, remember that Stratagy Admin does not
work with the COM 3 or 4 port.
❐
Toshiba suggests that you do not write over the Stratagy Admin directory when installing a newer
version of Stratagy Admin. Always retain previous versions of the Stratagy Admin software for use
with other Flash systems.
❐
Make sure you have your Stratagy I&M Manual and Strata DK I&M and Programming Manuals on
hand for the installation. Be sure to read the instructions before installing the system.
❐
Remember to back up your database after installation.
❐
Remember to effectively update the Automatic System Recovery feature, you must shut down and
restart the Flash after making important programming changes.
If you have read and completed this checklist, installation will be a breeze!
DK40i/DK40/DK16e/DK16
Code 92 for slot 00
:
SMDI is available on all processors. The A processor must have
OK, let's get started!
DK24/DK56/DK96
Code 92 or 93
4011027