System Paging For Ring No Answer - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Customization Examples
Users Menu Examples

System Paging for Ring No Answer

Stratagy can call a user's extension and then, after receiving a Ring No Answer, give the caller the
option to page the user through the office paging speakers. Stratagy can then transfer the caller to
an extension where the call can be picked up by the user using Direct Call Pick Up.
The following example illustrates one way to do this on a Strata DK424, using a phantom standard
station port as a park zone.
Program Example
In the following example:
•
User ID 5: Page Party User ID.
•
User ID 500: Call Park Station User ID.
•
User ID 501: Back to Original Extension User ID.
•
Call pickup code: #5#5
•
Telephone number to pick up call: 240
➤
To program the example
1. For User ID 5 (Page Party), define the user's record to contain:
Extension
@
=(%S0,%P)
F-
#30
-
P(U,%P)
P(G1)
F,
G(500)
Do Not Disturb
2. Access the User ID mailbox via telephone. Record:
Greeting 1: "...has a call holding. To pickup, dial #5240."
3. For User ID 500 (Call Park Station), define the user's record to contain:
Extension
Maximum Rings
Do Not Disturb
Store Messages
RNA Chain
Busy Chain
8-4
@=(%S0,%P)F-#30-P(U,%P)P(G1)F,G(500)
Suppresses normal process.
Remembers previous User ID mailbox, and stores it in %S0.
Performs a hookflash and pauses 0.5 second.
Dials #30 to page.
Pauses 0.5 second.
Plays user name recording from previous User ID mailbox.
Plays greeting 1.
Performs a hookflash and pauses 2 seconds.
Goes to User ID 500 (to perform the supervised transfer).
Off
240 (The standard station port to transfer to for pickup.)
9
Off
No
501
501
Stratagy I&M 06/02