Notification To A Pager On Urgent Messages Only - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Customization Examples
Notify Menu Examples

Notification to a Pager on Urgent Messages Only

You can program Stratagy to light a message waiting light for all messages, while paging or calling
the user offsite when he receives a message marked Urgent. To do this, for the particular paging
Notify record, change the Type field from Normal to Urgent.
To program Stratagy to notify a user via his digital pager when he receives a message marked
Urgent is similar to "Notification to a Pager." To program Stratagy to light the message waiting
light for all messages, see
on page 8-14
page 8-15.
Program Example
In the following example:
•
User ID: 405
•
Dial 9 for an outside line
•
The paging system uses the * to designate a "-" in the pager display
➤
To program the example
Define the Notify record to contain:
Title
Type
Variable
Method
9
W(4,T)
%V
,,
W(2,P)
-
%U
#
-
How It Works
When Stratagy receives an Urgent call for this User ID, Stratagy:
1. Dials the user's digital pager's telephone number.
2. When the pager answers, Stratagy relays the User ID.
For this example, the following displays on the pager: 405.
8-18
"Message Waiting Light Control When Light On and Off Codes Differ"
or "Message Waiting Light Control When Light On and Off Codes Are the Same" on
<enter title/comment for identification>
URGENT
<digital pager's telephone number>
9W(4,T)%V,,W(2,P)-%U#-
Dials 9 for an outside line.
Waits up to 4 seconds to hear dial tone.
Dials the contents of the Notify record's Variable field. This should be the digital pager's
telephone number.
Pauses 4 seconds (2 seconds x 2).
Waits up to 2 rings for the pager/beeper to answer.
Pauses 0.5 second to enable the pager's answer confirmation tones.
Relays the User ID.
Dials # to end call.
Pauses 0.5 second.
Stratagy I&M 06/02