System Configuration; Modify System Configuration Parameters - Toshiba Stratagy IVP8 Installation And Maintenance Manual

System Configuration

Use this function to change Stratagy's system options and parameters, define timeout values and
computer configurations, and control per port options. See
a list of the parameters, their definitions and default settings.
Most Stratagy System Configuration options do not require modification. We recommend that you
modify the system password immediately. All other options have default values, but can be
modified as required.
We recommend that you use the Stratagy Backup Utility initially and periodically to preserve
system data. Before making changes to this selection, ensure you have a current backup. See
"Backup Utility" on page 11-3

Modify System Configuration Parameters

1. From the Tools menu, press 6.
The Stratagy System
Configuration screen displays
(shown right). The parameters
are listed in alphabetical order.
The Stratagy System
Configuration Screen is split
into two areas: the left lists the
actual parameters and their
values, the right lists context-
sensitive help for each
parameter.
Note Fax settings are not
available to the Stratagy.
2. Highlight the parameter by using the arrow (↑↓)
...or Page Up and Page Down keys. Press Enter.
3. Modify the parameter using the line editor at the top of the screen.
If a line begins with a #, it is a heading or a parameter that is "commented out" and is not
active. To enable a parameter that is commented out, remove the starting # and set the value.
4. Press ESC.
5. From the Stratagy System Config screen, press 1. The changes are transmitted to Stratagy and
Stratagy is shut down and restarted. By shutting down and restarting Stratagy, the changes take
effect.
...or 2. The changes are transmitted to Stratagy but Stratagy is not shut down or restarted. Until
you restart Stratagy, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
6. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt displays. To
continue, you must re-enter Stratagy Admin.
Stratagy I&M 06/02
and "Restore Utility" on page
Configure Stratagy
System Configuration
"System Parameters" on page 4-14
11-5.
for
4-13