Toshiba Stratagy IVP8 Installation And Maintenance Manual page 85

Parameter
hot_box
ksu_time
lcoff
Stratagy I&M 06/02
User ID Stratagy "jumps" to when Stratagy detects a specific tone. Used to handle
incoming faxes, detect connections from TDD machines for deaf communication,
etc.
Up to 24 tones can be detected and directed to a mailbox by entering a User ID
followed by a number (1~24). To add a specific tone, such as a Fax connect tone, to
the tone table, it must be one of the first four tones defined, and it must be marked
as a "terminating tone." The PCPM code associated with the tone must be in the
range 13~36, which corresponds to hot_boxes 1~24.
If no number is defined after the User ID, Stratagy directs calls that emit an industry
standard Fax CNG tone of a specific frequency (factory defined in the tone table) to
the defined User ID.
Syntax: set hot_box XXX Y
Where: XXX = User ID
Y = hot box number (1~24)
If Y is omitted, all 24 hot boxes are set to the User ID entered. For example:
set hot_box 994 sets all 24 to User ID 994
set hot_box 994 1 sets the first hot_box to User ID 994
Possible values: valid User ID, possibly followed by a hot_box value (1~24)
Default: 994
Synchronizes IVP8's system clock with the system clock of the supporting
Strata CTX/Strata DK telephone system.
Information obtained by IVP8 from the Strata CTX/Strata DK system does not
contain "second" time; therefore, there may be a 1~60 second difference between
the Strata CTX/Strata DK system and the KSU time displayed on the main menu of
the Stratagy Admin program.
Important!
The IVP8 electronically monitors the clock information on the LCD of
the defined PDKU port. If other LCD messages (e.g., message
waiting callback information) appear over the system time, the IVP8 is
unable to consistently synch to the KSU time.
True: IVP8 synchronizes the IVP8's system clock with the Strata CTX/Strata
DK's system clock. The KSU time displays at the top right corner of the
Main Menu. Setting this parameter to true, disables the
daylight_saving_time parameter.
False: IVP8 does not use the Strata CTX/Strata DK's system clock.
Important!
•
The Strata DK uses a 24-hour system clock, but does not notate a.m./p.m. on
the LCD display. Because of this, during the initial installation or when the
system has been shut down for any extended time, it is necessary to program
the correct date and time in the IVP8 Main Menu, Date/Time function or via
System Administrator's mailbox.
•
This feature requires SMDI integration to work with the Strata CTX.
Possible values: true, false
Default: false
Minimum duration of loop current off before the RDSP driver posts event 20 to the
System Event Queue. In 10 ms units.
Default: comment line (#set lcoff -10)
To enable, remove the starting # and set the value.
Description
Configure Stratagy
System Parameters
IVP8 only
4-21