Toshiba Stratagy IVP8 Installation And Maintenance Manual page 67

Voice processing systems
Hide thumbs Also See for Stratagy IVP8:
Table of Contents

Advertisement

Table 4-1
Stratagy Admin PC Configuration Fields (continued)
Field
Port number
Serial Port
Possible values:
Default: 2
Baud rate of serial port.
Baud Rate
Possible values: 1200, 2400, 9600
Default: 9600
Sets modem initialization string. The modem initialization string can be changed to work with
specific brand modems. Refer to the user's manual for your individual modem for the initialization
string.
Note
The protocol used by Stratagy Admin does not support error correction, data compression,
or auto baud rate adjustment. If problems are encountered connecting remotely, turn
these parameters off on the Stratagy Admin PC modem. Refer to your modem user guide
for instructions.
Default: AT&F&C1&D2L0Q0V0X0E1
where:
AT
The command that tells the modem to come to Attention.
&F
Return to factory defaults.
Instructs the modem to use the factory set parameters.
Modem Init
&C1
Data Carrier Detect (DCD) signal.
String
Set to on, it indicates presence of a data carrier.
&D2
Data Terminal Ready selected.
L0
Speaker volume.
Off or low volume.
Q0
Mode responses.
Enables result codes to be issued to the screen.
V0
Result code format.
Numeric format.
X0
Extended result codes.
Disables monitoring of busy tones unless forced otherwise by country requirements. Sends
only OK, connect, ring, no carrier, error and no answer result codes.
E0
Command Character Echo.
Disables echoing of the commands to the screen.
Stratagy I&M
06/02
Description/Default
1~2
Configure Stratagy
Configuring Stratagy Admin Software
4-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stratagy flashSg-f-2Sg-f-4

Table of Contents