Tools Utility; Toshiba Plug And Play - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Configure Stratagy

Tools Utility

Tools Utility
This section discusses the Tools menu. For the Backup Utility, Restore Utility, Upgrade Stratagy
Software, Retrieve Trace File and Filecopy functions, see
and Troubleshooting.
➤
To access Tools Option
1. Press Alt+t.
2. Type the password (the default password is Stratagy) and press Enter. See
page 11-2

Toshiba Plug and Play

The Stratagy is pre-installed for the Strata CTX and Strata DK processors. If you need to change
this selection to a different Strata telephone system, change it using this selection.
If you only want to change the PBX type, do not use this function. Instead, set the pbx_type
Note
parameter in the Stratagy System Configuration screen.
Selecting this function:
•
Changes all the settings to the new Toshiba telephone system default values.
•
Deletes any User ID mailbox customizations.
•
Installs the Stratagy default mailboxes.
Note Existing messages and mailbox greetings are not deleted when Plug and Play is selected.
For example, if Mailbox 200 has messages and greetings and Toshiba Plug and Play for
Strata CTX is run, then Mailbox 200 retains the messages and greetings from the previous
database.
Change Toshiba Plug and Play Option
1. From the Tools menu, press 5.
2. From the Toshiba Plug and Play screen, enter
the number of the selection.
The Stratagy utility automatically defines the
telephone system dial codes and tone patterns,
system integration patterns and default
mailboxes for the specific telephone system.
3. When the process is complete, press any key to
reboot. The DOS prompt displays.
4-4
for a description of the menu options.
Chapter 11 – Maintenance, Upgrades
Stratagy I&M
"Tools" on
06/02