Step 9: Configure Stratagy Admin Software; Step 10:Access Stratagy; Step 11:Configure Stratagy; Step 12:Program The Mailboxes - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Voice processing systems
Hide thumbs Also See for Stratagy IVP8:
Table of Contents

Advertisement

Installation

Step 9: Configure Stratagy Admin Software

Flash and IVP8 External Modem
An external modem can be installed on the Stratagy for a communication speed of 9600 baud. If
use of an external modem is desired, use the following installation procedure.
To install an external modem
1. Equip the Stratagy with a Hayes-compatible 14.4KB V32.bis modem. Toshiba's fax/modem
(SG-FMOD) has been tested for consistent operation and is recommended. Use of other
modem models cannot be guaranteed for trouble-free operation.
Note
The default setting configured for the Stratagy remote access is serial port 2 (see
2). Both local and remote access use the same designated serial port on the Stratagy.
2. Connect a telephone line to the modem. Use either a station connected to the telephone system
or a dedicated Central Office (CO) line.
Step 9: Configure Stratagy Admin Software
Configure Stratagy Admin software using the Admin PC Configuration screen. See
Configure Stratagy
Step 10: Access Stratagy
Access Stratagy using the remote method
Step 11: Configure Stratagy
Configure Stratagy using the Stratagy Configuration Utility. See
Stratagy
Step 12: Program the Mailboxes
Program the User mailboxes for the customer's application. See
complete details on using the screens.
Step 13: Program the Applications
Note
See

%K Token

Stratagy recognizes the Calling Party Identification when sent from the Strata CTX/Strata DK
telephone system through a SMDI integration.
Once a value is determined to be a Calling Party ID number, it is stored in a buffer (
the duration of the call. A User ID programmed with a token application that reads the
performs the programmed function (e.g., a database look up for call routing based on the number
calling). When the call is completed, the value stored in the buffer (
2-14
for instructions on using the screen.
for instructions on using the utility.
Chapter 7 – Token Programming
(Chapter 3 – Access and Use
Chapter 4 – Configure
Chapter 6 – Menus
for complete details on all the Stratagy tokens.
%K
Figure 1-
Chapter 4 –
Stratagy).
for
token) for
%K
value
%K
) is cleared.
Stratagy I&M
06/02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stratagy flashSg-f-2Sg-f-4

Table of Contents