Toshiba Stratagy IVP8 Installation And Maintenance Manual page 75

...or 2.The changes are transmitted to Stratagy but Stratagy is not shut down or restarted. Until
you restart Stratagy, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
7. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt displays. To
continue, you must re-enter Stratagy Admin.
Define the Integration Strings Stratagy Matches
➤
Define the actual received codes with the call and the extension information. There are six
character codes. Each character code represents a call state, and the placement and quantity of
the code represents the extension information.
The character codes are:
r ring no answer
b busy
e direct dial (to access User ID directly by asking for security code)
s information regarding where the call came from (for handling message replies)
i immediate record (play the record tone and start taking a message)
x a wild card that matches anything (use this carefully)
You have complete control for changing Stratagy's integration behavior based upon your specific
requirements. For example, if your customer does not want to allow for Busy extensions, then
simply modify the integration character codes and replace the b's with r's.
Use Character Codes
The following example illustrates using the character codes.
•
Direct Call
Start with the Direct test call. There is a integration pattern labeled Direct Call in the
description field. Part of the integration pattern should contain the extension number from
where you called. Edit the integration pattern to replace the extension number with one or more
e's.
Example:
integration pattern displayed: ***1120
test extension you called from: 120
edit the dial code to read: ***1eee
•
Forward from Ring No Answer
Under the Forward from Ring No Answer you should have two patterns. Both integration
patterns should contain the extension number that was call forwarded to Stratagy. Part of one
pattern probably contains the available extension number you called from. The other
integration pattern may or may not contain information pertaining to the CO line where the call
came from.
Example:
integration pattern displayed: #02#101#120# and #03##120
available extension you called from: 101
test extension that was call forwarded: 120
edit the dial codes to read: #02#sss#rrr# and #03##rrr# respectively
Stratagy I&M 06/02
Configure Stratagy
Tools Utility
4-11