Notification To A Pager - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Notification to a Pager

You can program Stratagy to notify a user via his digital pager.
In the example below, assume you want Stratagy to notify the user of the total number of messages
and the number of new messages in his User ID mailbox.
Program Example
In the following example:
•
Dial 9 for an outside line
•
The paging system uses the * to designate a "-" in the pager display
•
User ID: 405
•
Total number of messages in User ID 405: 5
•
Number of new messages in User ID 405: 3
➤
To program the example
Define the Notify record to contain:
Title <enter title/comment for identification>
Type NORMAL
Variable <digital pager's telephone number>
Method
9W(4,T)%V,,W(2,P)-%U*%M*%N#-
9 Dials 9 for an outside line.
W(4,T) Waits up to 4 seconds to hear dial tone.
%V Dials the contents of the Notify record's Variable field. This should be the digital pager's
telephone number.
,, Pauses 4 seconds (2 seconds x 2).
W(2,P) Waits up to 2 rings for the pager/beeper to answer.
- Pauses 0.5 second to enable the pager's answer confirmation tones.
%U Relays the User ID.
* Dials
%M Relays the total number of messages in this User ID mailbox.
* Dials
%N Relays the number of new messages in this User ID mailbox.
# Dials
- Pauses 0.5 second.
How It Works
Per the notification schedule, Stratagy:
1. Dials the user's digital pager's telephone number.
2. When the pager answers:
•
Relays the User ID.
•
Relays the total number of messages.
•
Relays the number of new messages.
For this example, the following displays on the pager: 405-5-3.
Stratagy I&M 06/02
. (Used by many paging systems to designate a "-" in the pager display.)
. (Used by many paging systems to designate a "-" in the pager display.)
to end call.
Customization Examples
Notify Menu Examples
8-17