Toshiba Stratagy IVP8 Installation And Maintenance Manual page 84

Configure Stratagy
System Parameters
Parameter
guest_defaults
guest_max
guest_min
hangup_supervision
4-20
Designates the Guest User ID Defaults Box Stratagy uses when creating a new
Guest User ID. The field values in the Guest Defaults User ID are copied into a
Guest User ID upon initialization.
•
User's Information fields are not copied. The User ID field contains the new
User ID you specified. Comment, Extension, and Directory Name fields are not
defined. If a Security Code is defined, Stratagy uses it instead of the User ID as
the default.
•
Since guests can only access the User ID that created it and other guests of
that User ID, Stratagy defines Group1 as the User ID of the mailbox that
created it. For example, if the Guest User ID was created by User ID 76, then
Group 1's value is 76.
•
All other Users Menu Options and Group/Chains fields are copied. All Notify
and Auto records are copied.
•
Define the Guest User ID Defaults Box settings before creating Guest User
IDs. This initializes all new Guest User IDs with a minimum number of settings.
This is useful for setting default settings such as message light On/Off.
Except for the Group field values, operates the same way as the defaults_box
parameter.
Possible values: valid User ID
Default: 996
Highest numbered Guest User ID. When used with the guest_min parameter, limits
the number of Guest User IDs that can be created.
Example: If this value is 90199, then the last Guest User ID that may be created is
User ID 90199.
Possible values: valid User ID larger than the guest_min parameter setting
Default: 90199
Lowest numbered Guest User ID. When used with the guest_max parameter, limits
the number of Guest User IDs that can be created.
Examples: If this value is 90000, then the first Guest User ID that is created has
User ID 90000. The second guest has User ID 90001, etc.
Possible values: valid User ID smaller than guest_max parameter setting
Default: 90000
Whether the switch supports Loop Current Off/Drop for hang up supervision.
True: If your switch supports Loop Current Off/Drop for hang up supervision, this
parameter should be true. Even if your switch does not support this
capability, it usually has NO NEGATIVE EFFECT when set to true.
False: If you notice call transfer problems such as disconnects or three-way
conferencing, try setting this parameter to false. If the problems are not
solved by setting this parameter to false, set it back to true.
Possible values: true, false
Default: true
Description
IVP8 only
IVP8 only
IVP8 only
Stratagy I&M 06/02