Fill Out Checklists And Forms; Installation; Step 1: Unpack And Inspect Stratagy - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Installation

Installation

Fill out Checklists and Forms

The following checklists, forms, and surveys are available in
simplify the installation process. Make copies as needed.
•
Pre-installation Company Survey
•
Stratagy Pre-installation Checklist
•
Stratagy Installation Checklist
•
Users Form
•
Auto (Scheduling) Form
•
Notify Form
•
Greeting Scripts Form
Installation
Before starting the installation, read through these instructions thoroughly. Important information
is included in this guide that is crucial to a successful installation.

Step 1: Unpack and Inspect Stratagy

1. When you receive the system, examine all packages carefully and note any visible damage. If
you find any damage, do not open the packages. Contact the delivery carrier immediately and
make the proper claims.
2. Check the items contained in the packages against the packing list. In addition to the hardware
components, you should receive an anti-static wrist strap, a caution sticker and a
documentation package with the IVP8. For Flash, you should receive the hardware components
shown below and a Stratagy Flash Wall-Mounting Template and Instructions with the
documentation package.
3. Inspect all equipment for damage. If equipment is missing or damaged, contact your supplier
immediately.
4. Remove any shipping tape and packing material used to protect the system during shipment.
Retain the packing materials for re-use when transporting system hardware.
2-4
Stratagy Flash
V O I C E P R O C E S S I N G
3296
RJ11 cable for each port used
Appendix A – Checklists/Forms
24VAC
700 mA
Power Supply
6 ft. cord
Parts not included:
Stratagy Admin Cable (SG-ADMCBL)
for communicating with computer or modem
(available from Toshiba)
and
2 mounting screws
with flange standoffs
2 wall anchors
(for drywall installation)
Stratagy I&M 06/02