No Data-Plane - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

no data-plane

To disable the STP package bridge of the local dataplane configuration, use the
following command.
ruckus(config)# no data-plane <name> forward-stp
Syntax Description
This command uses the following syntax:
name: Dataplane name
forward-stp: Disables the STP package bridge
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# no data-plane name indus7-d1
no diameter-remote-service
To disable the diameter remote service, use the following command.
ruckus(config)# no diameter-remote-service <name>
Syntax Description
This command uses the following syntax:
name: Service name
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# no diameter-remote-service
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Configuration Commands (e - r)
no data-plane
280