Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 25

Figure 8. Logging into CLI
• You are now logged into the controller CLI as a user with limited privileges by
looking at the CLI prompt. If you are in limited mode, the prompt appears as
ruckus> (with a greater than sign). To view a list of commands that are available
at the root level or user mode, enter help or ? as seen in
NOTE: To change the CLI prompt to a privileged mode, see step 5.
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Introduction to the Controller Command Line Interface
Accessing the Command Line Interface
Figure 8 and Figure 9.
25