Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 401

Table 145
Table 145. Commands related to ruckus(config-zone-ap-snmp-options configuration)
Syntax and Type
ruckus(config-zone-ap-snmp-
options)# ap-snmp
Type: Privileged
ruckus(config-zone-ap-snmp-
options)# no
Type: Privileged
ruckus(config-zone-ap-snmp-
options)# snmp-v2-community
Type: Privileged
ruckus(config-zone-ap-snmp-
) # snmp-v3-user
options
Type: Privileged
Table 146
tion commands.
Table 146. Commands related to ruckus(config-zone-ap-snmp-options-snmp-v2-community
configuration)
Syntax and Type
ruckus(config- zone-ap-snmp-
options-snmp-v2-community )#
no
Type: Privileged
-zone-ap-snmp-
ruckus(config
options-snmp-v2-community)#
notification
Type: Privileged
-zone-ap-snmp-
ruckus(config
options-snmp-v2-community)#
notification-target
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
lists the related zone-ap-snmp-options configuration commands.
Parameters (if any)
snmp-v2-community
<name>
snmp-v3-user <name>
<name>
<name>
lists the related zone-ap-snmp-options-snmp-v2-community configura-
Parameters (if any)
notification
notification-target
read
write
<ip> <port>
Configuration Commands (s - z)
Description
Enables AP SNMP.
Disables the settings that have
been configured with these
commands.
Adds or updates the AP SNMPv2
community.
Adds or updates the AP SNMPv3
user.
Description
Disables the settings that have
been configured with these
commands.
Enable notification privilege.
Enables notification target
configuration commands.
zone
401