Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 125

Table 39. Commands related to ruckus(config-domain-zone-ap-group)
Syntax and Type
ruckus(config-domain-zone-ap-
group)# led-mode
Type: Privileged
ruckus(config-domain-zone-ap-
group)# lldp
Type: Privileged
ruckus(config-domain-zone-ap-
group)# location
Type: Privileged
ruckus(config-domain-zone-ap-
group)# location-additional-info
Type: Privileged
ruckus(config-domain-zone-ap-
group)# member
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
<ap-model>
<ap-model> [ enable |
disable ]
<text>
add <ap-mac>
move-to <apgroup-
name> <ap-mac>
remove <mac>
Configuration Commands (a - d)
Description
Sets the LED mode for specific AP
model.
Sets the LLDP for a specific AP
model.
Sets the location.
Sets the additional information
location.
Sets the AP group member.
It adds a new access point to
current AP group.
The AP Mac address removes the
access point from the current AP
group and moves it to other AP
group.
domain
125