Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 404
Hide thumbs
Also See for SmartCell Gateway 200:
- Reference manual (384 pages) ,
- Getting started manual (104 pages) ,
- Administrator's manual (470 pages)
Table of Contents
Advertisement
Table 149. Commands related to ruckus(config-zone-bonjour-fencing-policy)
Syntax and Type
ruckus(config-zone-bonjour-
fencing-policy)# no
Type: Privileged
ruckus(config-zone-bonjour-
fencing-policy)# rule
Type: Privileged
Table 150
Table 150. Commands related to ruckus(config-zone-bonjour-policy)
Syntax and Type
ruckus(config-zone-bonjour-
policy)# description
Type: Privileged
ruckus(config-zone-bonjour-
policy)# do
Type: Privileged
ruckus(config-zone-bonjour-
policy)# end
Type: Privileged
ruckus(config-zone-bonjour-
policy)# exit
Type: Privileged
ruckus(config-zone-bonjour-
policy)# help
Type: Privileged
ruckus(config-zone-bonjour-
policy)# name
Type: Privileged
ruckus(config-zone-bonjour-
policy)# no rule
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
description
rule <rule index>
<index> - rule index
lists the related zone-bonjour-policy configuration commands.
Parameters (if any)
<text>
<name>
<priority>
Configuration Commands (s - z)
Description
Sets to delete sub commands.
Sets the bonjour fencing rule.
Description
Sets the description.
Executes the do command.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
Sets the bonjour policy name.
Deletes the rules based on the rule
priority.
zone
404
Advertisement
Table of Contents
