Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 162

Hide thumbs Also See for SmartCell Gateway 200:
Table of Contents

Advertisement

Table 62. Commands related to ruckus(config-domain-zone-wlan)
Syntax and Type
ruckus(config-domain-zone-
wlan)# auth-type
Type: Privileged
ruckus(config-domain-zone-
wlan)# bss-minrate
Type: Privileged
ruckus(config-domain-zone-
wlan)# bypass-cna
Type: Privileged
ruckus(config-domain-zone-
wlan)# calea
Type: Privileged
ruckus(config-domain-zone-
wlan)# called-sta
Type: Privileged
ruckus(config-domain-zone-
wlan)# client-fingerprinting
Type: Privileged
ruckus(config-domain-zone-
wlan)# client-tx-rx-statistics
Type: Privileged
ruckus(config-domain-zone-
wlan)# core-network
Type: Privileged
ruckus(config-domain-zone-
wlan)# description
Type: Privileged
ruckus(config-domain-zone-
wlan)# device-policy
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
[ 5.5mbps | 24mbps |
12mbps | 1mbps | 2mbps
]
[ l3ogre | ttg-pdg | bridge |
mixed | l2ogre | pmipv6 ]
<text>
[ <Policy Name> ]
Configuration Commands (a - d)
Description
Sets the authentication type.
Sets the BSS minimum rate.
Enable to bypass CNA server.
Enable Calea server.
Sets the called STA ID.
Sets the client fingerprinting.
Enables ignore statistics from
unauthorized clients.
Sets the core network.
Sets the description,
Sets the device policy.
domain
162

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?

This manual is also suitable for:

Virtual smartzone high-scaleSmartzone 300

Table of Contents