Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 144

Table 53. Commands related to ruckus(config-domain-ethernet-port-profile)
Syntax and Type
ruckus(config-domain-zone-
ethernet-port-profile )# tunnel
Type: Privileged
ruckus(config-domain-zone-
ethernet-port-profile )# type
Type: Privileged
ruckus(config-domain-zone-
ethernet-port-profile )# vlan-
members
Type: Privileged
ruckus(config-domain-zone-
ethernet-port-profile )# vlan-
untag-id
Type: Privileged
Table 54 lists the related domain-zone-guest-access configuration commands.
Table 54. Commands related to ruckus (config-zone-guest-access)
Syntax and Type
ruckus(config-domain-zone-
guest-access)# description
Type: Privileged
ruckus(config-domain-zone-
guest-access)# do
Type: Privileged
ruckus(config-domain-zone-
guest-access)# enable-terms-and-
conditions
Type: Privileged
ruckus(config-domain-zone-
guest-access)# end
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
<vlan-members>
<vlan-untag-id>
Parameters (if any)
<text>
Configuration Commands (a - d)
Description
Enables tunnel.
Sets the port type.
Sets the VLAN members.
Sets the VLAN untag identifier.
Description
Sets the description.
Executes the do command.
Enables the web portal terms and
conditions.
Ends the current configuration
session and returns to privileged
EXEC mode.
domain
144