Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 231

Related Commands
• Table 91
• Table 92
• Table 93
Table 91 lists the related interface configuration commands.
Table 91. Commands related to ruckus(config-interface)
Syntax and Type
ruckus( config-interface )# data-
plane
Type: Privileged
config-interface )# do
ruckus(
Type: Privileged
config-interface )# end
ruckus(
Type: Privileged
config-interface )# exit
ruckus(
Type: Privileged
ruckus( config-interface )# help
Type: Privileged
ruckus( config-interface )# interface
Type: Privileged
config-interface )# name
ruckus(
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
lists the related interface configuration commands.
lists the related interface-user-defined configuration commands.
lists the related interface-management configuration commands
Parameters (if any)
<name> forward-stp
<name>: Dataplane name
forward-stp: Disables the
STP package bridge
<control>
Configuration Commands (e - r)
Description
Updates the dataplane
configuration
Executes the do command.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
Sets the physical interface such as
control interface.
Renames the user-define
interface.
interface
231